- Powerful: loads of up to 400 N
- Fast: up to 17.5 mm/s
- Resistant: IP54 rating, aluminum housing, stainless steel rod
- Safe: overcurrent protection
- Controllable: ready to be operated with external inductive sensors
|Max. load||400 N at 7.2 mm/s|
|Max. speed (no load)||20 mm/s|
|Power supply||24 VDC|
|Max. current||1.6 A|
|Starting current||2.0 A|
|Overcurrent protection||2.2 A|
|Weight||700 g (140 mm stroke)|
|Rod material||Polished stainless steel|
|Cable length||500 mm|
|Operating temperature||-20 °C to +50 °C|
|Storage temperature||-30 °C to +70 °C|
|Duty cycle||10 % (2 out of 20 minutes)|
Ready to be controlled with inductive sensors
The inner magnetic nut and the cilindrical shape of the housing enable the RA38IS to be externally operated with any commercial inductive sensor.
In the event of an obstruction or an excessive load, the overcurrent protection feature will cut off the current at 2,2 A to protect the actuator.
Force, speed and current
Use in the dashed area is not recommended.
The above figures are with a room temperature of 20ºC.
Contact us for customized configurations
For customized configurations or bulk orders please contact us.
Every single RA 38 IS is checked in a strict quality control before leaving production in order to guarantee an optimum performance and durability.